PEEK machining and fabrication “Polyetheretherketone”
PEEK Machining and Fabrication. On the list of high price material PEEK is right up there at the top. However the people using it believe it is worth every penny. It takes high temperature, is dimensionally stable and it has very high chemical resistant.
PEEK Roller, it most likely will be working 50 years from the day it was installed.
PEEK is great for high temperature applications.
“Polyether ether ketone” is a colorless organic thermoplastic polymer in the polyaryletherketone family, used in engineering applications.
“Polyether ether ketone” is a colorless organic thermoplastic polymer in the polyaryletherketone family, used in engineering applications.
Melting point: 649.4°F (343°C)
Density: 1.32 g/cm³
Glass temperature: 143 °C
Tensile strength (σt): 90–100 MPa
Young’s modulus (E): 3.6 GPa
Thermal conductivity: 0.25 W/(m·K)
| PEEK | Tem | SG |
|---|---|---|
| Unfilled | 320F – 166C | 1.31 |
| 30% Glass Filled | 660F – 315C | 1.54 |
| 30% Carbon filled | 550F – 288C | 1.41 |
| Bearing Grade | 383F – 195C | 1.44 |
More about Bell Plastics
Need a steel bracket to go with your part? We can make the steel bracket or a stainless steel bracket in house. Since 1979 Bell Plastics we custom make thousands of parts every year. We do plastic forming for anything from boat windshield to guards bigger then your car. Looking for less we also do little parts.