2.5 inch Dust Collection Port (Saw to Hose Adapter) SKU 17025

Description

2.5 Inch dust collection port, Saw to hose Adapter

Our 2.5 inch dust collection port will save you hours of clean up.

These adapter allow you to connect your dust collection hose to a table saw, band saw or sander. It also will work on any machine that makes chips.

The backing plate is bolted to the insides of the saw with the round hose connect passes through the saw’s wall.  A hose is slipped over the hose connector and held in place with a hose clamp. Because all saw are different our backing plate comes large flange and no holes so you can drill it to match your saw.

Made in the USA of thick ABS plastic.

This is for the adapter port only.

We also make port adapters for hoses 2 inch to 8 inches.

Dimensions: 11″ L x 8″ W x 2″ H

6 inch dust adapter LINK

Place the adapter down on the cabinet as low as possible. Next close up all open area in the cabinet. If you have a older table saw with a open side Bell Plastics also makes motor covers and doors with closed vents.

Return Policy

Any of our saw products can be return with in 60 days from recite of product for a refund. You must pay the shipping cost both ways.

Shipping

We ship by UPS or USPS.

Brand

Made by Bell Plastics in Hayward, CA 94545 USA.

More about Bell Plastics

Need something made from plastic? At Bell Plastics we make 100,000’s of custom parts every year. 99 percent of our manufacturing is custom made parts to our customer specs. Give us a call at 510 – 784 – 1111 and see if we can help you.

Bell Plastics also makes boat windows, boxes, displays, guards, machined parts, chemical tanks, fume hoods, plastic duct and many other things.

Since 1979 we have been making great plastic parts. We still have the same one part minimum.